Detailed description of the problem:
I have an Ikea smart light panel which is in the FLOALT series, and an Ikea TRÅDFRI gateway connected to the light and the app.
The sunrise feature wich should slowly increase the smart light from zero to whatever i set to max, is turning the light on at maximum brightness a second before then regressing to the intended transition of minimum light to maximum.
Steps to reproduce:
Connect smart light to app
Make an alarm with sunrise feature enabled
Start sleep tracking
Alarm goes off
Lights turn to max (bug)
Version of Sleep as Android:
20230505
Other
There is a newer gateway that ikea has made, wich is called DIRIGERA, it is a newer series but i have no knowledge about possible differences in the communication between the app and that gateway.
1 Like
Hello, I have the same bug as well. Having a motorola “moto g84 5G” and also the Trådfri gateway (not Digeria).
Also in my case, light flashes for 1 second to max. brightness prior to going into sunrise mode.
Hi @Den.helb2, could you please ideally send the logs (Left ≡ menu → (?) Support → Report a bug) after this happens, or after you reproduce it?
Anyone having this issue - test if the lights will flash with high intensity during the alarm if the lights were dimmed before they were turned off.
We need to turn on the lights before we can change the properties of the lights for the sunrise effect. Normally, this happens immediately, so the lights will turn on already dimmed and ready for the sunrise effect. Sadly, due to a bug in the IKEA API, it does not work reliably.
The IKEA API was surprisingly poorly written, so we had to reverse-engineer the integration. But we thought it was worth the struggle. Then IKEA abandoned the platform and moved to Dirigera without any compatibility. All our work is lost and we cannot update the integration at this point. We are sorry for the limitations…
1 Like